Armaflex AC Coils 15mm 5/8 Air Conditioning Pipe Insulation AC-13x015/E 32m

ARMAFLEX AC Coil
The Professional Choice for Faster Installation

Armaflex AC Coil is a highly flexible elastomeric material which is quick and easy to install It has a closed cell structure with a built in vapour barrier and a high resistance to water vapour transmission enabling the insulation material to maintain a higher level of energy conservation efficiency. Armaflex AC Coil is a continuous tube in a box - for a faster and more economic installation, also ideal for installing in restricted areas.

Armaflex AC Coil has an excellent fire safety performance achieving BS 476 part 6 1989 for low fire propagation, producing minimal contribution to the overall heat release, and BS 476 part 7 1987 for zero surface spread of flame.

Armafix pipe supports are recommended for use where thermal bridging may occur. In heating installations the use of pipe supports will generally improve energy conservation.

The benefits of being well prepared

??	Less cutting - less waste
??	Faster installation - reducing the number of butt joints to be glued
??	Easy to carry carton - dimensions 600 x 600 x 210 mm
??	Suitable for use in the food, pharmaceutical and chemical industries

Application Areas

??	Process Work
??	Hot and Cold Water Services
??	Chilled Water Lines
??	Heating Systems
??	Air Conditioning Ductwork
??	Refigeration Pipework and Ancillary Equipment

Properties	Values	Remarks
Material	Foamed nitrile rubber
Max. Surface Temperature	+105??C
Max. Temperature for Flat Surface	+85??C
Min. Surface Temperature	-200??C*	* For temperatures between -50?? C and - 200?? C, please consult our Technical Department.
Thermal Conductivity at 0??C	0.034 W/(m ?À K)	Test acc. to EN ISO 8497
Thermal Conductivity at +20??C	0.036 W/(m ?À K)
Thermal Conductivity at +40??C	0.038 W/(m ?À K)
Water Vapour Permeability	Moisture Resistance Factor ?Á: 7,000
	2.79 ?À 10(-14) kg/(m s Pa)	BS EN ISO 9346:1996
Water Absorption	0.2% by volume	Test acc. ASTM C 209
Surface Spread of Flames	Class 1	Surface Spread of Flame acc. BS 476 Part 7: 1997
Fire Propagation	Total Index Performance (I) ≤ 12 Sub Index (i1) ≤ 6	Fire Propagation acc. BS 476 Part 6: 1989
Fire Performance acc. to Building Regulation	Class O	Test results for Surface Spread of Flames and Fire Propagation meets Class O fire category for
		Building Regulations 2000 (England and Wales)
		Building Standards (Scotland) Regulations 1990
		Building Regulations 2000 (Northern Ireland)
		Building Regulations 1997 (Republic of Ireland)
Reaction to fire	Self-extinguishing, does not drip
Noise Reduction	Sound Absorption Coefficient ISO 354:2003 up to 0.8	Also suitable for use in the prevention of sound passage
Resistance to	Building Materials: Very Good Chemicals: Consult Product Test List Ozone: Very Good
Environmental Aspects	ODP zero, GWP zero
Health Aspects	Dust & Fibre Free Microban anti-microbial protection
Other Properties	FM Approved Tested in accordance with UL 94
Outdoor Applications	Class O Armaflex should be painted with Armafinish FR paint to the recommended thickness within 3 days. Two or more coats may be required.