22mm Underground Waterproof Pipe Insulation Armaflex Tuffcoat B
[L513]

Armaflex TuffCoat Made to withstand mechanical impact

Armaflex Tuffcoat is a flexible, closed cell, elastomeric nitrile rubber insulation with a polymeric coating. Based on the excellent technical values of Class O Armaflex it is the perfect solution wherever protection against mechanical impact is required.

With its enhanced surface protection, Armaflex Tuffcoat can even be used on underground pipework - including mains cold water and ground source heat pump pipes.

Armaflex Tuffcoat is available in tubes and coils with a black cover.

The Competitive Advantage of Specifying Armaflex TuffCoat

	New! Built-In Anti-Microbial Protection Reduces Mould and Bacteria Growth
	Wash down-waterproof and easy to clean. Suitable for areas which require frequent wash down
	Resists damage from mechanical impact
	Built in vapour barrier prevents condensation
	Semi gloss finish - requires no additional painting
	Flexible and Lightweight
	Compatible with mains cold water pipes for prevention of freezing Armaflex TuffCoat - Technical Product Data Properties Values Remarks Material Foamed Nitrile Rubber with Polymeric Covering Max. Surface Temperature +80??C For temperatures above +80?? C, please consult our Technical Department. Min. Surface Temperature -10??C For temperatures below -10?? C, please consult our Technical Department. Thermal Conductivity at 0??C 0.034 W/(m ?? K) Test acc. to EN ISO 8497 Thermal Conductivity at +20??C 0.036 W/(m ?? K) Thermal Conductivity at +40??C 0.038 W/(m ?? K) Water Vapour Permeability Moisture Resistance Factor ??: 7,000 2.79 ?? 10(-14) kg/(m s Pa) BS EN ISO 9346:1996 Water Absorption 0.2% by volume Test acc. ASTM C 209 Surface Spread of Flames (Insulation) Class 1 Surface Spread of Flame acc. BS 476 Part 7: 1997 Fire Propagation (Insulation) Total Index Performance (I) ≤ 12 Sub Index (i1) ≤ 6 Fire Propagation acc. BS 476 Part 6: 1989 Fire Performance acc. to Building Regulation (Insulation) Class O Test results for Surface Spread of Flames and Fire Propagation meets Class O fire category for Building Regulations 2000 (England and Wales) Building Standards (Scotland) Regulations 1990 Building Regulations 2000 (Northern Ireland) Building Regulations 1997 (Republic of Ireland) Reaction to fire Self-extinguishing, does not drip Noise Reduction Sound Absorption Coefficient ISO 354:2003 up to 0.8 Also suitable for use in the prevention of sound passage Resistance to Building Materials: Very Good Chemicals: Consult Product Test List Environmental Aspects ODP zero GWP zero Health Aspects Dust & Fibre Free Microban anti-microbial protection Outdoor Applications NO additional coating is necessary.