Aspen Mechanical Peristaltic Air Conditioning Pump FP2078

The Mechanical peristaltic pump operates by using a remote reservoir with an internal float mechanism. It is available with or without a high level alarm output. The pump is designed to be mounted remotely if required and has a 3 metre (9.8ft) lead to the float switch.

Simply position the float switch in the condensate tray or fix to the drain-pipe connection (depending on chosen reservoir). Then connect the reservoir to the pump.

Technical Specifications

Operates on a float switch

2 reservoir options available

Available with an alarm option

Self-priming lifts 3 metres

12 metres discharge head

Water flow rate: 6.25 ltrs per hr @ 12 metres head

No siphoning back

No loud sound from dry running

Manual test switch

Pumps water, contaminated water & air

Pump rating: 0.2A, 230V AC
Alternative voltages available

Fire retardant plastics

Inlet/outlet size: 6mm

Push-in plug

Wall-mounted bracket

Dimensions:
145mm(H) x 160mm(W) x 83mm(D)

The Aspen Mechanical peristaltic pump is the latest model. The pump is designed to be mounted remotely if required and has a 3 metre (9.8ft) lead to the float switch. Simply connect the float switch to the condensate tray or drainpipe fitting.

Peristaltic pumps have the advantage of pumping dirty water or pumping dry without damaging the pump or making a noise.

Aspen Mechanical Pump Service Guide.

Inspect pump head regularly and change the pump  head tube every 12 months or more frequently if required.

If any problems with the pump occur check the tube first!

To remove pump head make sure the roller assembly is vertical. Remove transparent cover and fit replacement pipe. The addition of a smear of silicon grease will ease the refitting of the lid, reducing
potential friction noise.

This only takes 3 minutes!

The test switch should always be returned to the NORMAL position after inspection.

ELECTRICAL CONNECTIONS:
Brown - Live
Blue - Neutral
Green/Yellow - Earth

Technical Specifications.

Operates on a float switch
  
Self priming lifts 3 metres (9.8ft)
  
12 metres (40ft) discharge head
  
Water flow rate: 6.25 ltrs (1.65 US gallons) per hr @ 12 metres (40ft)
  
No siphoning back
  
No loud sound from dry running
  
Pumps water, fibrously contaminated water  and air
  
Fits into ceiling void
  
Pump rating: 0.2A, 230V AC  Alternative voltages available

Maximum water temperature: 40C
  
Fire retardant plastics
  
Available with an alarm option

Installation Notes

Install this pump inside the unit or above a false ceiling. Connect live, neutral and earth to the evaporator. Position the float switch/reservoir into the condensate tray or to the drainpipe connection.

The mechanical pump now has a new push in plug which makes installation and maintenance easier.