Air Conditioning Pipework Kit

This kit includes the copper pipe, insulation and flare connections needed to make up the connections for your air conditioning system.

SAE-Flare Fitting

ARMACELL SAE FLARE FITTINGS - Secure and Fast Solution for Split Installations

The Armacell SAE flare fitting meets the highest safety standards. It replaces the soldering in a fast, safe and economic way. No additional sealing is needed, only metal-to-metal sealing by the rim on the flare of the compression ferrule. The nut made of brass alloy fits perfectly on the tube armature, and the most important part -the compression ferrule- takes over the sealing much better than the traditional hand-made flared end to the copper tube very effectively. No copper gasket is needed and none of the pieces have to be replaced after maintenance and repair.

T732 Air Conditioning Copper Tube Pipe 06.4mm 1/4 15m 6.44mm x 1.

T735 Air Conditioning Copper Tube Pipe 12.7mm 1/2 15m 12.7mm x 1.

Refrigeration and Air Conditioning tube conforms with DIN 8905/EN12735 T1 and T2.

Plain tubes made of highquality
99.9% copper, blank inside, clean and dry.

Product facts:
Special tube for air conditioning and refrigeration 
Comply with industry standards    
Various delivery forms
Sealed after the cleaning process
Bright, clean and dry internal surface

L330 Armaflex Air Con Pipe Insulation 06mm (1/4) x 9mm wall 15 metre coil x 1.

L332 Armaflex Air Con Pipe Insulation 12mm (1/2) x 9mm wall 15 metre coil x 1.

ARMAFLEX CLASS O, 15 METRE COIL.
The professional insulation that prevents condensation and energy losses

Armaflex is a highly flexible elastomeric material which is quick and easy to install and available in both tube and sheet form. It has a closed cell structure which has a built in vapour barrier with a high resistance to water vapour transmission enabling the insulation material to maintain a higher level of energy conservation efficiency.

In tube form, installation of Class O Armaflex can be carried out as the job progresses by sleeving onto pipes or if insulating an existing installation pre slit material is available, which can be snapped on and sealed using an Armaflex adhesive. Class O Armaflex tube is available in 2 metre lengths and as continuous coil in a box, meaning less cutting, less waste. In sheet form, Class O Armaflex is the ideal choice for insulating tanks, ductwork, large pipes or irregular shapes.

Class O Armaflex has an excellent fire safety performance achieving BS476 part 6 1989 for low fire propagation, producing minimal contribution to the overall heat release, and BS476 part 7 1987 for zero surface spread of flame. Class O Armafix pipe supports are recommended for use where thermal bridging may occur. This is particularly important on refrigeration and chilled water pipes where there is a possibility of condensation taking place, particularly between the pipe and it's fixing. In heating installations the use of pipe supports will generally improve energy conservation.