Dixell XR40CX 12V Controller for MT and LT with electrical or hot gas defrost

The new PRIME series in CX format, is an innovative range of products that Dixell has introduced to the market for both heating and L.T., N.T. refrigeration. The CX family (32x74mm) has new functions plus an innovative and attractive design. The revolutionary introduction of 6 keys allows the user direct access to all main functions rapidly and intuitively, while the display with illuminated icons allows an instant view of the machineÔÇÖs status. All the instruments in CX format incorporate the latest know how and technology, both in software and hardware to ensure the highest standards of performance. 

ÔÇó Easy and intuitive installation

ÔÇó Energy saving cycles triggered via a digital input; for example, it is possible to work at a set point that is different from the normal one in order to, for instance, accumulate cold when electric power is cheaper

ÔÇó Continuous cycle with dedicated set; it allows the machine to work during rapid cooling cycles to achieve the right product temperature

ÔÇó Regulation stop by auxiliary probe (beer dispenser applications); it is possible to supervise the tube temperature, stopping the compressor when the temperature becomes too low, and restarting when the correct values have been restored

ÔÇó Regulation re-start with door switch alarm

ÔÇó Max and Min temperature or HACCP function

ÔÇó Digital input configurable as probe

ÔÇó Virtual probe for air on / air off application; used in multideck applications where it is important to regulate temperature using the average of 2 temperatures

ÔÇó Dual thermostat function; is available, on demand, in applications such as white or red wine rooms where it is necessary to maintain 2 different temperatures

ÔÇó Condenser temperature management to prevent critical situations in the system

ÔÇó TTL serial connection for monitoring systems (using XJ485CX)

ÔÇó Connection for remote display X-REP (excludes TTL)

Housing: self extinguishing ABS

Mounting: panel mounting in a 29x71mm panel cut-out

Connections: screw terminal block <= 2,5 mm>2

Power supply: 12Vac/dc or 24Vac/dc or 24Vac or 110Vac or 230vac ??10% 50/60Hz

Power absorption: 3VA max

Display: red/blue LED, 10,5mm with icons

Inputs: up to 4 NTC or PTC probes

Relay outputs: up to 4 relay 20(8)A, 16(5)A, 8(3)A or 5(2)A; 250Vac

Data storing: EEPROM memory

Operating temperature: 0?À60??C (32?À140??F)

Storage temperature: -25?À60??C (-13?À140??F)

Relative humidity: 20?À85% (non condensing)

Resolution: 0,1??C or 1??C or 1??F

Accuracy: better than 1% of F.S.

CONTROLLER FOR MT AND LT WITH ELECTRICAL OR HOT GAS DEFROST

Generals

Power supply: 12Vac/dc, 24Vac/dc, 24, 110, 230Vac

Probe inputs

Thermostat: NTC/PTC

Defrost: NTC/PTC

Condenser (on HOT KEY): NTC/PTC

Digital inputs

Alarm, start defrost, AUX, door switch, pressure switch: configurable

Relay outputs

Compressor: 8A, 20A optional

Defrost: 8A

Other

Hot Key / Prog Tool Kit: present

Remote display output: X-REP optional

Serial output: TTL

Buzzer: optional