937202 1/4 HENRY SCHRADER BALL VALVE

Applications

Ball valves are used in a wide variety of air conditioning and refrigeration
applications. They can be used for both liquid and gas applications.
This type of valve is commonly used for isolating purposes. All ball valves
are suitable for HCFC and HFC refrigerants, along with their associated
oils. The MWP of most valve sizes also allows them to be used for R410A
and sub-critical CO2 applications.

Main features

Construction features

• Bi-directional flow
• Indicator on stem shows valve position - open or closed
• Fully opened or closed with quarter turn of stem
• Positive stem stop ensures precise positioning in the open
or closed position
• Blow-out proof stem
• Ball cavity vented to prevent over-pressure
• Vented seal cap
• Schrader valve option

Sealing integrity features

• Premium quality PTFE ball seals
• Double O-ring stem seal design
• Premium quality neoprene stem O-ring seals
• Seal cap gasket bonded into valve body – acts as a secondary seal

Technical Specification

Allowable operating temperature = -40oC to +120oC
Allowable operating pressure = 0 to 40 barg or 0 to 46 barg,
depending on part number.

Materials of Construction

The components; valve body, valve body adaptor, ball and seal cap are
made from brass. The stem is made from plated steel. The pipe extensions
are made from copper. The ball seals are made from virgin PTFE, stem
O-rings from neoprene and the seal cap gasket from nylon.

Installation – Main Issues

The valve body must be protected against excessive heat during
installation, to prevent damage to the seals. Full instructions are given
in the Product Instruction Sheet, included with each valve.