HYDRON KT3 TANK CONDENSATE PUMP

The KT3 series condensate pumps are the industries quality leader, with the only three-year warranty available! Our cam-activated switch/float design empties twice the amount of water per cycle than other pumps on the market. The KT3 cycles less, equating to longer pump life! Our high torque motor breaks free any algae or scale that may develop in the pump during the off-season, assuring start-up at the beginning of the season!

Features
ABS PLASTIC RESERVOIR.
THERMALLY PROTECTED, HIGH TORQUE MOTOR WITH 300 SERIES S.S. SHAFT 
BUILT-IN FULL FLOW CHECK VALVE FOR 3/8" ID PLASTIC TUBING.
6' POWER CORD WITH MOLDED PLUG (NEMA 5-15P or 6-15P)
3 YEAR WARRANTY

SPECIFICATIONS	KT3
MOTOR: (hp @ rpm)	1/20 @ 3000
ELECTRICAL	115V 1.3A 230V 0.9A
INLET SIZE	2 INLETS 1" & 1- 3/8"
DISCHARGE SIZE	3/8" ID
RESERVOIR CAPACITY	3 QUART
UNIT DIMENSIONS (WxDxH)	*9.25" X 5.5" X 8.5"
INLET HEIGHT	4.5"
MAXIMUM TEMPERATURE	110?? F
SEALED RESERVOIR	NO
WEIGHT	5 LBS

* Width at mounting tabs is 11.25"

PUMP PERFORMANCE LIFT (feet) FLOW (GPH) 5.0 72 10.0 55 15.0 37 18 19

maximum lift 18.5 feet