Hydron Universal Condensate Removal Pump - Complete with SP10 float sensor

The Hydron Universal Condensate Pump is designed to fit within the air handler of most types of split Air Conditioners, Dehumidifiers and other cooling appliances where internal space and design permits. Alternatively the pump can be remotely mounted on a wall adjacent to the appliance, or concealed within the ceiling void.
The Hydron Universal offers a choice of sensor heads for use in the various typeset air conditioning systems currently marketed.
As from Mid 1995 Hydron Universal will be fitted with HYDRON STEALTH TECHNOLOGY noise control circuit.
The HST circuit automatically controls the noise level of the pump meter by adjusting the power to the pump depending en the amount of condensate being produced and the vertical is on the suction and discharge pipe. Once the optimum power level has been achieved the HST circuit automatically makes any adjustments required to suit any changes in environmental conditions.

Features

• Up to 9.1 Metres Vertical Pumping Head
• Up to 4.0 Metres Suction Lift.
• Choice of sensor heads suitable for most air conditioning units.
• Built in Fail-sate contacts as standard.
• Pump motor protected by thermal tripping device.
• Will incorporates HYDRON STEALTH TECHNOLOGY by Mid 1995

Specification
 
Pump Head: 9.1 metres
Flow Rate:   26 Litres/Hr 0 Pull Head
                    40 Litres/Hr 0 Zero Head
Noise Level: 30-64 dBA (depending on duty)

Dimensions:
     
Length 160mm 
Width  60mm
Depth   55mm 
Weight  1.0kg

Discharge Hose Connection 6mm
Power Supply 240v 1 ph 50Hz
Fail-Safe Contacts 2amp 240v