Free Delivery On UK Orders Over £50 Tel: 0161 775 1190


0 item(s) - £0.00

Pipe Insulation 06mm Bore 6mm Wall x 2m Class 0 Armaflex Tube

SKU: L300

Quick Overview

Armaflex Tube Pipe Insulation Lagging Black Foam Class O Nitrile Rubber

Insulating pipe and ductwork is one of the most effective ways to protect the value of an investment. Aside from restricting energy losses, insulation also prevents condensation and the associated risks of pipe corrosion and mould growth.

The Armacell range of thermal insulation materials is specifically designed to meet the challenges posed by modern mechanical services.
Class O Armaflex is the flexible, closed cell, elastomeric, nitrile rubber insulation that offers reliable protection against condensation and effectively prevents energy loss.

Class O Armaflex is dust free, fibre free and CFC free with an ODP of zero. Its inherent attributes and combination of properties makes Armaflex a highly efficient method of insulating hot and cold water services, chilled water lines, heating systems, air conditioning ductwork and refrigerated pipework for condensation control, energy conservation and frost protection.

The Competitive Advantage of Specifying Class O Armaflex

Built-in anti-microbial protection reduces mould and bacteria growth.
Built in vapour barrier prevents condensation.
Reduces energy losses by up to 87%.
Lightweight and flexible, quick and easy installation with low maintenance requirements, resulting in time and cost savings
Excellent resistance to the effects of ozone, oil and chemicals.

Application Areas.

Process work.
Hot and cold water services.
Chilled water lines.
Heating systems.
Air conditioning ductwork.
Refrigeration pipework and ancillary equipment.

Armaflex is a flexible closed cell elastomeric sheet with a Class O fire rating and energy saving thermal performance. Being a closed cell material, Armaflex requires no external vapour barrier and will not absorb moisture by "wicking".

Armaflex has the unique capability of providing significant sound absorption while remaining completely closed cell. Aerodynamic and fan noise within the ducting can be reduced when Armaflex is used as an internal lining. Due to its excellent thermal values, Armaflex also performs as a thermal insulator which negates the need for additional thermal insulation on the exterior of the ductwork.

When Armaflex is used as an external acoustic lining, noise break-out from the duct wall can be significantly reduced. Further improvements can be achieved when Armaflex is used in combination with ArmaSound RD and Arma-Chek R.

Class O Armaflex now also comes with Microban anti-microbial protection built-in, offering enhanced resistance against bacteria and mould growth. This makes Class O Armaflex suitable for use in offices, schools and hospitals.

Armaflex is dust, fibre and formaldehyde free, and inhibits the onset of "sick building syndrome".

Benefits and Special Product Attributes

New! Built-In Anti-Microbial Protection Reduces Mould and Bacteria Growth
Dust and fibre free insulation with thermal and acoustic properties
Impressive airborne noise absorption at problem frequencies
Meets recommended Part L energy performance when internally lining ductwork*
Excellent de-coupling and isolation performance on pipes and ducts in contact with other structural and service elements
Suitable for use in areas of high humidity and areas with possible oil and chemical contact

*Applies to warm ductwork only at 32 mm thickness. Assumes a high emissivity ductwork finish.

Class O Armaflex - Technical Product Data

Properties Values Remarks
Material Foamed nitrile rubber
Max. Surface Temperature +105 C
Max. Temperature for Flat Surface +85 C
Min. Surface Temperature -50 C For min. temperatures between -50C and - 200C, please consult our Technical Department.
Thermal Conductivity at 0?? C 0.034 W/(m K) Test acc. to EN ISO 8497
Thermal Conductivity at +20?? C 0.036 W/(m K)
Thermal Conductivity at +40?? C 0.038 W/(m K)
Water Vapour Permeability Moisture Resistance Factor ?? 7,000
2.79 10(-14) kg/(m s Pa) BS EN ISO 9346:1996
Water Absorption 0.2% by volume Test acc. ASTM C 209
Surface Spread of Flames Class 1 Surface Spread of Flame acc. BS 476 Part 7: 1997
Fire Propagation Total Index Performance (I) ≤ 12
Sub Index (i1) ≤ 6
Fire Propagation acc. BS 476 Part 6: 1989
Fire Performance
acc. to Building Regulation
Class O Test results for Surface Spread of Flames and Fire Propagation meets Class O fire category for
Building Regulations 2000 (England and Wales)
Building Standards (Scotland) Regulations 1990
Building Regulations 2000 (Northern Ireland)
Building Regulations 1997 (Republic of Ireland)
Reaction to fire Self-extinguishing, does not drip
Noise Reduction Sound Absorption Coefficient ISO 354:2003 up to 0.8 Also suitable for use in the prevention of sound passage
Resistance to Building Materials: Very Good
Ozone: Very Good
Chemicals: Consult Product Test List
Health Aspects Dust & Fibre Free
Other Properties ODP zero
GWP zero
Tested in accordance with UL 94
Outdoor Applications Class O Armaflex should be painted with Armafinish FR paint to the recommended thickness within 3 days. Two or more coats may be required.

Only 301 left

Availability: In stock

Excl. Tax: £2.15 Incl. Tax: £2.58


More Views